Samson UR1 Specifications download pdf (Page 6)

1: Antenna - This swivel mounting allows full rotation for

optimum placement of the antenna. In normal operation,

the antenna should be placed in a vertical position. It can

be folded inward for convenience when transporting the

AR1. See the “Setting Up and Using Your AirLine System”

section on page 16 in this manual for more information

about antenna positioning.

2: Power On / RF LED - This lights red whenever the AR1 is

powered on and green whenever the AR1 is receiving RF

signal from a transmitter.

3: Peak LED - This LED lights red when output signal from

the AR1 is at the onset of clipping (that is, when it is on the

verge of being distorted). If you see this light during

operation, move the microphone further away or lower the

volume level of your instrument or transmitter. For more

information, see the section entitled “Setting Up and Using

Your AirLine System” on page 16 in this manual.

4: Power switch - Move this switch in the direction of the

arrow to turn power to the AR1 on; move it away from the

arrow to turn power off.

5: Volume control - This knob sets the level of the audio

signal being output through both the AR1 balanced and

unbalanced output jacks (see #6 and #7 on the following

page). Reference level is obtained when the knob is turned

fully clockwise.

Samson AirLine

Guided Tour - AR1 Receiver

ENGLISH

1 2 3 4 5 6 7 8 9 10 11 ... 83 84

No comments

Samson UR1 Specifications Page 6