Samson R11 User Manual download pdf (Page 2)

ARCHITECT’S & ENGINEER’S

SPECIFICATION

The microphone shall be of a dynamic

type with hypercardioid polar pattern. The

microphone shall provide its output on a male

XLR-type connector. Output impedance shall

be 600 ohms.

The microphone shall be constructed of a

zinc casing and shall contain a triple-plated

multi-stage windscreen and noise filter for the

removal of pops, sibilance and onstage noise,

an aluminum humbucking voice coil for the

elimination of magnetic field interference and

true hum rejection, a Neoprene transformer

cover for the reduction of microphonics, a

high-output Neodymium element, and a multi-

axis shock-mount to minimize handling noise.

The microphone shall be equipped with

an On/Off switch. The microphone shall have

frequency response from 50 Hz to 15 kHz, sen-

sitivity of -71 dBV at 94 dB SPL, and a maxi-

mum SPL of 137 dB. Dimensions shall be 1.8

″

(46 mm) head length, 4.2″ (107 mm) main

unit length and 6

″ (152 mm) total length.

Weight shall be 10.5 oz. (300 g). The micro-

phone shall carry a three-year warranty.

The microphone shall be a SAMSON R11.

Specifications subject to change without notice. © 1998 SAMSON

FREQUENCY RESPONSE

10

0

-10

-20

-30

-40

(dB)

20

50

100

200

500

1000

2000

5000

10000

20000

Frequency(Hz)

R11

Measuring Obj.;

SAMSON

R11 SPECIFICATIONS

Type: Dynamic

Polar Pattern: Hypercardioid

Frequency Response: 50 Hz - 15 kHz

Sensitivity (0 dB = 1 V / 0.1pa @ 1 kHz): -71 dB ± 3 dB

Max. SPL 137 dB

Output Impedance (@ 1 kHz): 600 Ω (Lo Z)

Connector: 3-pin XLR male

Switch: On/Off

Dimensions: 6

″ • 152mm

Weight: 10.5 oz. • 300g

1 2

Contact: 1
FREQUENCY RESPONSE 2

Comments to this Manuals

No comments