PRO
PRODUCT SPECIFICATION SHEET
AMPLIFIERS
TYPE:
POWER
AMPLIFIERS
PRODUCT DESCRIPTION
SZ1360
POWER AMPLIFIER
SERIES
CATEGORY
ZONE AMPLIFIER AMPLIFIERS
GENERAL DESCRIPTION
The Samson SZ Series amplifiers have been designed
to provide robust, clean output with low distortion
and wide dynamic range, along with the dependability
demanded by the most professional design engineers
and audio installers. The SZ1360 will deliver 360
watts at 4 ohms. The amplifiers can also run at 25, 70
or 100 volts thanks to its internal, high performance
matching transformers, making it an ideal solution for
Constant Voltage systems.
The SZ1360 is enclosed in a convenient two rackspace
chassis and features a reliable linear amplifier design.
Rear panel controls include Input Level Adjust from
–12 to 0 dB and a High Pass Filter at 400Hz to use
with announcement horn speakers. A front panel
Signal, Peak and Protection LED indicator helps you
set the correct operating levels. Standard XLR Input
and Link connectors, plus Euroblock speaker output
connectors are provided to ensure easy connections
and maximum flexibility.
The SZ1360 employs internal wind tunnels with forced-
air cooling via an internal fan, greatly reducing the
chance of overheating and other thermal problems.
Multi-stage protection for power-up, overheating,
over-current, short circuit, low output impedance and
DC voltage assures high reliability under the most
demanding situations.
The SZ1360 amplifier is road tough with its all steel
chassis, 19-inch rackmount design and convenient
carry handles facilitating easy installation in any rack.
Optimized for commercial installations including schools,
houses of worship, office buildings and live sound venues,
the SZ1360 amplifier will deliver clean, reliable power.
FEATURES
>
Built-in 70/100 volt output transformers with flat
frequency response from 70Hz to 18kHz provide
constant voltage for distributed speaker systems.
>
Rear panel level control allows precision adjustments
from -12 to 0 dB.
>
Clean, crisp sound - Impressive audio specifi cations
such as 0.04% THD, dynamic range of 105 dB, crosstalk
of 80 dB, and frequency response of 70Hz to 18kHz
guarantee ultra-clean sound quality.
>
LED signal indicators continuously display power output
levels and allow you to correct for overloading (clipping)
conditions.
>
Forced air cooling via internal fan provides reliable
performance without thermal and overheating problems.
>
Protection circuitry (with dedicated LEDs) that guards
against
overheating or faulty wiring conditions.
>
Input connection is made using a standard male XLR
connector to accommodate balanced signal sources.
>
Output connections are made using Euroblock
connectors which accept 12 gauge wire.
>
The SZ Series can be mounted in any standard 19-inch
rack (taking just two rack spaces), making it easy to
integrate into any fi xed or traveling PA rig.
>
The amplifi ers are enclosed in a ruggedly constructed
(all-steel chassis with a sleek, black fi nish), standard
2-space 19-inch rackmount unit.
©2008 Samson v1.0 3/08
(2 pages)
(60 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals