Samson MPL 1502 Specifications download pdf (Page 8)

Guided Tour - Main Section

1: Meter - This seven-segment bar meter shows the continuous output level of

the main stereo output. For optimum signal-to-noise ratio, try to adjust all levels

so that program material is usually at or around 0 VU, with occasional but not

steady excursions to the red +2 or +6 segments. See the “Setting the Correct

Gain Structure” section on page 14 for more information.

2: Meter LEDs - These show the status of various conditions within the MPL

1502. The left LED (labeled “Phantom”) lights steadily red when phantom power

is being supplied to all 5 mic inputs (see the “Guided Tour - MPL 1502 Rear

Panel” section on page 8 for more information). The right LED (labeled “Power”)

lights steadily red when the MPL 1502 is powered on.

3: Tape In / Channel 14/15 switch - When pressed in (the “on” position), the

signal arriving at the rear panel tape inputs is automatically routed to stereo

channel 14/15, with the signal connected to the channel 14/15 line inputs

disconnected and the channel 14/15 Trim control made inactive (the tape input

signal is automatically given unity gain). When this switch is out (the “off”

position), channel 14/15 operates normally and the tape input signal is not heard.

−∞

+15

−∞

-20 -10 -6 -2

0+2+6

-20 -10 -6 -2

0+2+6

15 CHANNEL STEREO MIXER

MPL 1502

+20

AUX 1 LEVEL

BALANCE

+20

AUX 2 LEVEL

CHANNEL 14 / 15

OFF

TAPE IN

PHANTOM POWER

LEFT

RIGHT

HEADPHONE

LEVEL

010

MAIN

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Samson MPL 1502 Specifications Page 8