Samson AirLine Specifications download pdf (Page 12)

ENGLISH

1: Antennas (A and B) - The

antenna mountings allow full

rotation for optimum placement.

In normal operation, both Antenna

A (the antenna on the left) and

Antenna B (the antenna on the

right) should be placed in a vertical

position. Both antennas can be

folded inward for convenience

when transporting the UR1. See

the “Setting Up and Using the

AirLine System” section on page

15 in this manual for information

about antenna installation and

positioning.

2: AF (Audio Frequency) Level control - This knob sets the level of the audio signal being output through both the balanced and

unbalanced output jacks on the rear panel (see #2 and #4 on page 12 in this manual). Reference level is obtained when the knob is

turned fully clockwise (to its “10” setting).

3: Peak LED - This LED lights yellow when output signal from the UR1 is at the onset of clipping (that is, when it is on the verge of

being distorted). If you see this light during operation, move the microphone further away or lower the output level of your

instrument or transmitter. For more information, see the section entitled “Setting Up and Using the AirLine System” on page 15 in

this manual.

Guided Tour - UR1 Receiver / Front Panel

SAMSON

UHF RECEIVER

Samson AirLine

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

No comments

Samson AirLine Specifications Page 12