Samson UM1 Specifications download pdf (Page 10)

Wireless / Pole Mounting

As shown in figure 1 on the left, the top panel of the Expedition EX20 and EX30

provides a prewired compartment that accommodates any of three different

Samson wireless receivers: the UM1 or M32 UHF models or the VM1 VHF

model. Output signal from a wireless receiver mounted in an EX30 arrives at

channel 2 of the onboard mixer.

figure 1

Connecting a Micro Receiver to the Expedition

1 Remove the Wireless Compartment Cover by lifting it off the compartment locat-

ed on the top of the Expedition. (see figure 1)

2 Gently take out the power and audio cables from the compartment.

3 Connect the power cable to the DC input jack on your Samson VM1, UM1 or M32

Receiver.

4 Connect the audio cable to the audio out jack on your Samson VM1, UM1 or

M32 Receiver.

5 The audio signal from the receiver is sent to channel 2 on the EX30 mixer.

Pole Mounting - Procedures and Precautions

The underside of the Expedition contains a 1-3/8" stand mount socket that allows

it to be raised up on any standard speaker pole mounting (such as the Ultimate

Support Systems TS-30 or TS-33 speaker stands). Pole-mounting is generally

advisable when you want to maximize the distance that the Expedition covers

(sometimes called speaker “throw”).

If you are using an EX500 subwoofer, you can use its

integral pole mount to place an EX10, EX20 or EX30

immediately above it, creating a complete column of

sound.

Use common sense when setting up speaker stands.

Whenever pole mounting cabinets, make sure all fasten-

ers are tight (or to the manufacturers specifications) and

the stand can support the weight of the cabinet.

Set speakers and stands away from areas where people

will be, taking care that stands will not be knocked into

possibly causing injury from falling or tipping.

WARNING! Pole mounting of cabinets should be done

by qualified personnel.

Samson assumes no responsibility, personal liability or

liability for Expedition cabinets.

EX30 pole mounted on an EX500

EX30 pole mounted on a

speaker stand

1 2 ... 5 6 7 8 9 10 11 12

No comments

Samson UM1 Specifications Page 10