Samson H4 Datasheet Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
4-Track Mode
ZOOM H4
43
only stereo files can be selected.
HINT
As long as the file is from the same project, a
track other than one used during recording can
also be selected.
NOTE
It is not possible to select the same file for
multiple tracks.
5.
To accept the file selection, press the
jog dial.
The file for playback is selected.
6.
Repeat steps 2 – 5 to assign files to
other tracks in the same way.
7.
Out of the TRACK [1] – [4] keys,
press the key for the desired track,
so that the key is lit in green
(playback).
8.
To play the files assigned to the
tracks, press the top (@
) of the
[MENU] key.
The respective files of the tracks are played.
Using the locate function and A-B
repeat function in 4-track mode
In 4-track mode, you can locate a specific point
and use the A-B repeat function as in stereo
mode. For details, see page 37, 38.
NOTE
If Overwrite mode is selected in 4-track mode,
the A-B repeat function is available during
playback, stop, and recording.
If Always New mode is selected in 4-track
mode, the A-B repeat function is not available
during recording (as in stereo mode).
Re-recording only a specified
region (punch-in/out function)
Punch-in/out is a function that lets you re-record
just a specified region of a previously recorded
track. The action of switching a currently-
playing track to record mode is called "punch-
in", and the action of switching back from
recording to playback is called "punch-out".
The H4 provides two ways to do this. You can
control the operation manually ("manual punch-
in/out"), or you can cause punch-in/out to occur
automatically at previously specified points
("auto punch-in/out").
NOTE
Punch-in/out is possible only in Overwrite mode.
Manual punch-in/out
To manually re-record only a part of an audio
track, proceed as follows.
1.
At the top screen, press one of the
TRACK [1] – [4] keys to select the
track you want to re-record.
The display shows the number of the selected
track.
2.
Press the same TRACK [1] – [4] key
that you pressed in step 1 repeatedly,
so that the key is lit in red.
The input signal can now be monitored. The
number of the track selected as recording target
is shown in reverse.
Number of currently selected track
Currently selected file name
H4_E.book 43 ページ 2006年9月1日 金曜日 午後7時56分
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 99 100

Comments to this Manuals

No comments