Samson 120A Specifications download pdf (Page 12)

Operating the RESOLV 120a

The Ins and The Outs

The RESOLV 120a features both line

level and speaker level inputs and out-

puts so that connection with passive

or active satellites is easy. The PREAMP

LEVEL INPUTS simply pass the line

level signal through to the PREAMP

LEVEL OUTPUTS. You can use the line

inputs and outputs to interface the

RESOLV 120a with active monitors like

the Resolve 65a’s. The SPEAKER LEVEL

INPUTS can be connected from the

speaker outputs of a power amplifier,

and then the signal is sent from the

SPEAKER OUTPUTS, which are high-

passed, to passive satellite speakers.

The following section details both

the line level and speaker level con-

nections. The subsequent sections

detail the set-ups for many typical

configurations with both passive and

active monitors. In addition, there is a

detailed cable wiring diagram on page

16.

SPEAKER OUTPUT

– The

SPEAKER OUTPUT connectors are

made via 5-way binding posts.

Use these connectors to connect from your external power amplifier speaker output. So, although the connector is

labeled FROM EXTERNAL AMPLIFIER SPEAKER OUTPUT, when using this configuration the connection here is used as

the input signal to the Resolv 120a.

SATELLITE SPEAKER - The SPEAKER OUTPUT connectors are 5-way binding posts. Connect here from your external

power amplifier. Use these connectors to connect to any passive satellite monitors like the Resolv 65’s.

INPUT (PREAMP LEVEL) – The left and right PREAMP INPUT connectors are made via standard RCA connectors.

They can be used to connect from any line level device such as a mixer.

OUTPUT (PREAMP LEVEL) – The left and right PREAMP OUTPUT connectors are made via standard RCA connectors.

They can be used to connect from any active studio monitors such as the Resolv 65a’s.

MUTE JACK – The MUTE jack provides a switch closure to activate Resolv 120a’s internal mute circuit. By using a

standard footswitch that you can buy at your local music store or by making a cable with a switch, or even by wiring

a switch permanently in the mix area, the Resolv120a can be easily turned on and off.

AC INLET – Connect the supplied IEC power cable here. Be sure that the power switch is in the off position when

connecting the AC cord.

ENGLISH

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Comments to this Manuals

No comments

Samson 120A Specifications Page 12

Comments to this Manuals

Related products and manuals for Audio amplifiers Samson 120A